As A Water Quality Stabilizer, Industrial Glucose Has The Following Advantages

1. Glucose water has a significant blending effect and is suitable for molybdenum, silicon, phosphorus, tungsten, etc. Due to the harm of harmonious effects, the actual effect of corrosion inhibition is further improved;

2. As the temperature increases, the corrosion inhibition rate of glucose water is higher;

3. The technical standard for the anti scaling ability of glucose water on calcium, as well as the strong composite ability of magnesium and iron salts, especially on Fe3;

4. Glucose water, as a corrosion and scale inhibitor for cooling circulating water in the circulation system, is made from other corrosion and scale inhibitors, which can eliminate ecological crises;

5. As a nutrient source for sludge, industrial glucose powder can treat wastewater faster than urea solution.

During the adjustment period of wastewater treatment, adding glucose water is to better display the nitrogen source, better shape bacteria, and improve the biodegradability of wastewater. If the COD in the operating system software is faster than urea solution, it can be used as a nutrient source for sludge in sewage treatment. If BOD cannot provide vaccine growth, development, and reproduction, the drug must be added to prevent sludge embrittlement and reduce its biological activity.

Industrial glucose wastewater treatment

       The actual effect of industrial glucose wastewater treatment is very good, and the cost-effectiveness is also high. However, we should use it moderately so that we don't have to cause waste. Due to the varying usage levels of different water bodies, there are no fixed standards.

Many enterprises are prone to having too much or far from enough. At this point, the simplest method is to conduct certain tests based on the differences in the source water. Based on this result, we naturally know how much good delivery quantity is required in a specific production process.

During the delivery process, everyone should not immediately dispose of it into wastewater, but should engage in comprehensive integration. Firstly, mix according to the 1-5 ratio of industrial glucose and clean water. After melting, it is necessary to add water again until it becomes an aqueous solution with a content between 2% and 3%, in order to obtain a satisfactory user experience.